Unknown option: "-7"
Unix manual page for re_format. (host=minya system=Darwin)
RE_FORMAT(7) BSD Miscellaneous Information Manual RE_FORMAT(7)
NAME
re_format -- POSIX 1003.2 regular expressions
DESCRIPTION
Regular expressions (``REs''), as defined in IEEE Std 1003.2
(``POSIX.2''), come in two forms: modern REs (roughly those of egrep(1);
1003.2 calls these ``extended'' REs) and obsolete REs (roughly those of
ed(1); 1003.2 ``basic'' REs). Obsolete REs mostly exist for backward
compatibility in some old programs; they will be discussed at the end.
IEEE Std 1003.2 (``POSIX.2'') leaves some aspects of RE syntax and seman-
tics open; `=' marks decisions on these aspects that may not be fully
portable to other IEEE Std 1003.2 (``POSIX.2'') implementations.
A (modern) RE is one= or more non-empty= branches, separated by `|'. It
matches anything that matches one of the branches.
A branch is one= or more pieces, concatenated. It matches a match for
the first, followed by a match for the second, etc.
A piece is an atom possibly followed by a single= `*', `+', `?', or
bound. An atom followed by `*' matches a sequence of 0 or more matches
of the atom. An atom followed by `+' matches a sequence of 1 or more
matches of the atom. An atom followed by `?' matches a sequence of 0 or
1 matches of the atom.
A bound is `{' followed by an unsigned decimal integer, possibly followed
by `,' possibly followed by another unsigned decimal integer, always fol-
lowed by `}'. The integers must lie between 0 and RE_DUP_MAX (255=)
inclusive, and if there are two of them, the first may not exceed the
second. An atom followed by a bound containing one integer i and no
comma matches a sequence of exactly i matches of the atom. An atom fol-
lowed by a bound containing one integer i and a comma matches a sequence
of i or more matches of the atom. An atom followed by a bound containing
two integers i and j matches a sequence of i through j (inclusive)
matches of the atom.
An atom is a regular expression enclosed in `()' (matching a match for
the regular expression), an empty set of `()' (matching the null
string)=, a bracket expression (see below), `.' (matching any single
character), `^' (matching the null string at the beginning of a line),
`$' (matching the null string at the end of a line), a `\' followed by
one of the characters `^.[$()|*+?{\' (matching that character taken as an
ordinary character), a `\' followed by any other character= (matching
that character taken as an ordinary character, as if the `\' had not been
present=), or a single character with no other significance (matching
that character). A `{' followed by a character other than a digit is an
ordinary character, not the beginning of a bound=. It is illegal to end
an RE with `\'.
A bracket expression is a list of characters enclosed in `[]'. It nor-
mally matches any single character from the list (but see below). If the
list begins with `^', it matches any single character (but see below) not
from the rest of the list. If two characters in the list are separated
by `-', this is shorthand for the full range of characters between those
two (inclusive) in the collating sequence, e.g. `[0-9]' in ASCII matches
any decimal digit. It is illegal= for two ranges to share an endpoint,
e.g. `a-c-e'. Ranges are very collating-sequence-dependent, and portable
programs should avoid relying on them.
To include a literal `]' in the list, make it the first character (fol-
lowing a possible `^'). To include a literal `-', make it the first or
last character, or the second endpoint of a range. To use a literal `-'
as the first endpoint of a range, enclose it in `[.' and `.]' to make it
a collating element (see below). With the exception of these and some
combinations using `[' (see next paragraphs), all other special charac-
ters, including `\', lose their special significance within a bracket
expression.
Within a bracket expression, a collating element (a character, a multi-
character sequence that collates as if it were a single character, or a
collating-sequence name for either) enclosed in `[.' and `.]' stands for
the sequence of characters of that collating element. The sequence is a
single element of the bracket expression's list. A bracket expression
containing a multi-character collating element can thus match more than
one character, e.g. if the collating sequence includes a `ch' collating
element, then the RE `[[.ch.]]*c' matches the first five characters of
`chchcc'.
Within a bracket expression, a collating element enclosed in `[=' and
`=]' is an equivalence class, standing for the sequences of characters of
all collating elements equivalent to that one, including itself. (If
there are no other equivalent collating elements, the treatment is as if
the enclosing delimiters were `[.' and `.]'.) For example, if `x' and
`y' are the members of an equivalence class, then `[[=x=]]', `[[=y=]]',
and `[xy]' are all synonymous. An equivalence class may not= be an end-
point of a range.
Within a bracket expression, the name of a character class enclosed in
`[:' and `:]' stands for the list of all characters belonging to that
class. Standard character class names are:
alnum digit punct
alpha graph space
blank lower upper
cntrl print xdigit
These stand for the character classes defined in ctype(3). A locale may
provide others. A character class may not be used as an endpoint of a
range.
A bracketed expression like `[[:class:]]' can be used to match a single
character that belongs to a character class. The reverse, matching any
character that does not belong to a specific class, the negation operator
of bracket expressions may be used: `[^[:class:]]'.
There are two special cases= of bracket expressions: the bracket expres-
sions `[[:<:]]' and `[[:>:]]' match the null string at the beginning and
end of a word respectively. A word is defined as a sequence of word
characters which is neither preceded nor followed by word characters. A
word character is an alnum character (as defined by ctype(3)) or an
underscore. This is an extension, compatible with but not specified by
IEEE Std 1003.2 (``POSIX.2''), and should be used with caution in soft-
ware intended to be portable to other systems.
In the event that an RE could match more than one substring of a given
string, the RE matches the one starting earliest in the string. If the
RE could match more than one substring starting at that point, it matches
the longest. Subexpressions also match the longest possible substrings,
subject to the constraint that the whole match be as long as possible,
with subexpressions starting earlier in the RE taking priority over ones
starting later. Note that higher-level subexpressions thus take priority
over their lower-level component subexpressions.
Match lengths are measured in characters, not collating elements. A null
string is considered longer than no match at all. For example, `bb*'
matches the three middle characters of `abbbc',
`(wee|week)(knights|nights)' matches all ten characters of `weeknights',
when `(.*).*' is matched against `abc' the parenthesized subexpression
matches all three characters, and when `(a*)*' is matched against `bc'
both the whole RE and the parenthesized subexpression match the null
string.
If case-independent matching is specified, the effect is much as if all
case distinctions had vanished from the alphabet. When an alphabetic
that exists in multiple cases appears as an ordinary character outside a
bracket expression, it is effectively transformed into a bracket expres-
sion containing both cases, e.g. `x' becomes `[xX]'. When it appears
inside a bracket expression, all case counterparts of it are added to the
bracket expression, so that (e.g.) `[x]' becomes `[xX]' and `[^x]'
becomes `[^xX]'.
No particular limit is imposed on the length of REs=. Programs intended
to be portable should not employ REs longer than 256 bytes, as an imple-
mentation can refuse to accept such REs and remain POSIX-compliant.
Obsolete (``basic'') regular expressions differ in several respects. `|'
is an ordinary character and there is no equivalent for its functional-
ity. `+' and `?' are ordinary characters, and their functionality can be
expressed using bounds (`{1,}' or `{0,1}' respectively). Also note that
`x+' in modern REs is equivalent to `xx*'. The delimiters for bounds are
`\{' and `\}', with `{' and `}' by themselves ordinary characters. The
parentheses for nested subexpressions are `\(' and `\)', with `(' and `)'
by themselves ordinary characters. `^' is an ordinary character except
at the beginning of the RE or= the beginning of a parenthesized subex-
pression, `$' is an ordinary character except at the end of the RE or=
the end of a parenthesized subexpression, and `*' is an ordinary charac-
ter if it appears at the beginning of the RE or the beginning of a paren-
thesized subexpression (after a possible leading `^'). Finally, there is
one new type of atom, a back reference: `\' followed by a non-zero deci-
mal digit d matches the same sequence of characters matched by the dth
parenthesized subexpression (numbering subexpressions by the positions of
their opening parentheses, left to right), so that (e.g.) `\([bc]\)\1'
matches `bb' or `cc' but not `bc'.
ENHANCED FEATURES
When the REG_ENHANCED flag is passed to one of the regcomp() variants,
additional features are activated. Like the enhanced regex implementa-
tions in scripting languages such as perl(1) and python(1), these addi-
tional features may conflict with the IEEE Std 1003.2 (``POSIX.2'') stan-
dards in some ways. Use this with care in situations which require
portability (including to past versions of the Mac OS X using the previ-
ous regex implementation).
For enhanced basic REs, `+', `?' and `|' remain regular characters, but
`\+', `\?' and `\|' have the same special meaning as the unescaped char-
acters do for extended REs, i.e., one or more matches, zero or one
matches and alteration, respectively. For enhanced extended REs, back
references are available. Additional enhanced features are listed below.
Within a bracket expression, most characters lose their magic. This also
applies to the additional enhanced features, which don't operate inside a
bracket expression.
Assertions (available for both enhanced basic and enhanced extended REs)
In addition to `^' and `$' (the assertions that match the null string at
the beginning and end of line, respectively), the following assertions
become available:
\< Matches the null string at the beginning of a word. This is
equivalent to `[[:<:]]'.
\> Matches the null string at the end of a word. This is equiva-
lent to `[[:>:]]'.
\b Matches the null string at a word boundary (either the begin-
ning or end of a word).
\B Matches the null string where there is no word boundary. This
is the opposite of `\b'.
Shortcuts (available for both enhanced basic and enhanced extended REs)
The following shortcuts can be used to replace more complicated bracket
expressions.
\d Matches a digit character. This is equivalent to
`[[:digit:]]'.
\D Matches a non-digit character. This is equivalent to
`[^[:digit:]]'.
\s Matches a space character. This is equivalent to
`[[:space:]]'.
\S Matches a non-space character. This is equivalent to
`[^[:space:]]'.
\w Matches a word character. This is equivalent to
`[[:alnum:]_]'.
\W Matches a non-word character. This is equivalent to
`[^[:alnum:]_]'.
Literal Sequences (available for both enhanced basic and enhanced extended
REs)
Literals are normally just ordinary characters that are matched directly.
Under enhanced mode, certain character sequences are converted to spe-
cific literals.
\a The ``bell'' character (ASCII code 7).
\e The ``escape'' character (ASCII code 27).
\f The ``form-feed'' character (ASCII code 12).
\n The ``new-line/line-feed'' character (ASCII code 10).
\r The ``carriage-return'' character (ASCII code 13).
\t The ``horizontal-tab'' character (ASCII code 9).
Literals can also be specified directly, using their wide character val-
ues. Note that when matching a multibyte character string, the string's
bytes are converted to wide character before comparing. This means that
a single literal wide character value may match more than one string
byte, depending on the locale's wide character encoding.
\xx.. An arbitray eight-bit value. The x.. sequence represents
zero, one or two hexadecimal digits. (Note: if x.. is
less than two hexadecimal digits, and the character fol-
lowing this sequence happens to be a hexadecimal digit,
use the (following) brace form to avoid confusion.)
\x{x..} An arbitrary, up to 32-bit value. The x.. sequence is an
arbitrary sequence of hexadecimal digits that is long
enough to represent the necessary value.
Inline Literal Mode (available for both enhanced basic and enhanced
extended REs)
A `\Q' sequence causes literal (``quote'') mode to be entered, while `\E'
ends literal mode, and returns to normal regular expression processing.
This is similar to specifying the REG_NOSPEC (or REG_LITERAL) option to
regcomp(), except that rather than applying to the whole RE string, it
only applies to the part between the `\Q' and `\E'. Note that it is not
possible to have a `\E' in the middle of an inline literal range, as that
would terminate literal mode prematurely.
Minimal Repetitions (available for enhanced extended REs only)
By default, the repetition operators, `*', bound, `?' and `+' are greedy;
they try to match as many times as possible. In enhanced mode, appending
a `?' to a repetition operator makes it minimal (or ungreedy); it tries
to match the fewest number of times (including zero times, as appropri-
ate).
For example, against the string `aaa', the RE `a*' would match the entire
string, while `a*?' would match the null string at the beginning of the
line (matches zero times). Likewise, against the string `ababab', the RE
`.*b', would also match the entire string, while `.*?b' would only match
the first two characters.
The regcomp() flag REG_UNGREEDY will make the regular (greedy) repetition
operators ungreedy by default. Appending `?' makes them greedy again.
Note that minimal repetitions are not specified by an official standard,
so there may be differences between different implementations. In the
current implementation, minimal repetitions have a high precedence, and
can cause other standards requirements to be violated. For instance, on
the string `aaaaa', the RE `(aaa??)*' will only match the first four
characters, violating the rules that the longest possible match is made
and the longest subexpressions are matched. Using `(aaa??)*$' forces the
entire string to be matched.
Non-capturing Parenthesized Subexpressions (available for enhanced extended
REs only)
Normally, the match offsets to parenthesized subexpressions are recorded
in the pmatch array (that is, when REG_NOSUB is not specified, and nmatch
is large enough to encompass the parenthesized subexpression in ques-
tion). In enhanced mode, if the first two characters following the left
parenthesis are `?:', grouping of the remaining contents is done, but the
corresponding offsets are not recorded in the pmatch array. For example,
against the string `fubar', the RE `(fu)(bar)' would have two subexpres-
sion matches in pmatch; the first for `fu' and the second for `bar'. But
with the RE `(?:fu)(bar)', there would only be one subexpression match,
that of `bar'. Furthermore, against the string `fufubar', the RE
`(?fu)*(bar)' would again match the entire string, but only `bar' would
be recorded in pmatch.
Inline Options (available for enhanced extended REs only)
Like the inline literal mode mentioned above, other options can be
switched on and off for part of a RE. `(?o..)' will turn on the options
specified in o.. (one or more options characters; see below), while
`(?-o..)' will turn off the specified options, and `(?o1..-o2..)' will
turn on the first set of options, and turn off the second set.
The available options are:
i Turning on this option will ignore case during matching, while
turning off will restore case-sensitive matching. If REG_ICASE
was specified to regcomp(), this option can be use to turn that
off.
n Turn on or off special handling of the newline character. If
REG_NEWLINE was specified to regcomp(), this option can be use
to turn that off.
U Turning on this option will make ungreedy repetitions the
default, while turning off will make greedy repetitions the
default. If REG_UNGREEDY was specified to regcomp(), this
option can be use to turn that off.
The scope of the option change begins immediately following the right
parenthesis, but up to the end of the enclosing subexpression (if any).
Thus, for example, given the RE `(fu(?i)bar)baz', the `fu' portion
matches case sensitively, `bar' matches case insensitively, and `baz'
matches case sensitively again (since is it outside the scope of the
subexpression in which the inline option was specified).
The inline options syntax can be combined with the non-capturing paren-
thesized subexpression to limit the option scope to just that of the
subexpression. Then, for example, `fu(?i:bar)baz' is similar to the pre-
vious example, except for the parenthesize subexpression around
`fu(?i)bar' in the previous example.
Inline Comments (available for enhanced extended REs only)
The syntax `(?#comment)' can be used to embed comments within a RE. Note
that comment can not contain a right parenthesis. Also note that while
syntactically, option characters can be added before the `#' character,
they will be ignored.
SEE ALSO
regex(3)
Regular Expression Notation, IEEE Std, 1003.2, section 2.8.
BUGS
Having two kinds of REs is a botch.
The current IEEE Std 1003.2 (``POSIX.2'') spec says that `)' is an ordi-
nary character in the absence of an unmatched `('; this was an uninten-
tional result of a wording error, and change is likely. Avoid relying on
it.
Back references are a dreadful botch, posing major problems for efficient
implementations. They are also somewhat vaguely defined (does
`a\(\(b\)*\2\)*d' match `abbbd'?). Avoid using them.
IEEE Std 1003.2 (``POSIX.2'') specification of case-independent matching
is vague. The ``one case implies all cases'' definition given above is
current consensus among implementors as to the right interpretation.
The bracket syntax for word boundaries is incredibly ugly.
BSD Sept 29, 2011 BSD